The DT SWISS High Pressure Tubeless sealant is tailored to the higher tyre pressures used in road cycling. Its sealing particles seal cuts of up to 3 mm and help to prevent air loss during the ride.
It achieves its optimal sealing effect at a tyre pressure of 4 to 7.5 bar. Filling the tyre with a CO2 cartridge is also possible.
Details:
• Tubeless sealant for use at higher tyre pressures
• Specially tailored for road cycling use
• Seals cuts of up to 3 mm
• Optimal sealing effect at 4–7.5 bar
• Compatible with CO2 cartridges
Contents:
• 60 ml bottle (with spout)
In the box:
• 1 DT SWISS High Pressure Tubeless Sealant, 60 ml bottle with nozzle attachment
Note:
Shake vigorously for at least 10 seconds before use. For tyres with a width of 23 to 35 mm, the recommended filling quantity is 60 ml per tyre. After filling, rotate and shake the wheel to distribute the sealant inside the tyre. Renew the sealant depending on usage, but at the latest after 6 months. The maximum permissible pressure for the tyre and rim must not be exceeded!
Manufacturer: DT Swiss AG, Längfeldweg 101, 2504 Biel, Switzerland, www.dtswiss.com
Responsible person: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, www.mcg-parts.de
- Nuevo
){kind=small}
0
DT Swiss High Pressure Tubeless Sealant
Talla 60ml
Elija una talla
Estock en tienda
No en estock en: Bocholt Biketown, München, Hamburg, Berlin, Köln, Basel (Schweiz), Bern (Schweiz), Meilen (Schweiz), St. Gallen (Schweiz)
