Litemove RXW-2900 E-bike Headlight with Daytime Running Light and High Beam

With the RXW-2900, LITEMOVE presents its flagship in the range of powerful front lights for e-bikes. In addition to the 200 lux low beam, the RXW-2900 has a switchable high beam whose lighting power can be operated using the wired handlebar switch.

Up to 200 lux in the highest high beam setting show you the way safely even in the darkest night and on the trail. The excellent visibility allows you to ride with foresight. But the RXW-2900 front light not only shines far, it also shines wide. With an illumination width of up to 11 m you gain a good overview and can navigate safely through the dark. The front light also boasts extremely homogeneous light distribution. However, the powerful e-bike headlight also cuts a fine figure in everyday use. Thanks to a built-in light sensor, the bike light can automatically switch between daytime running light and low beam. 

This makes the RXW-2900 front light equally suitable for the city and the trail.

Details:
• Powerful e-bike front light with switchable high beam
• Homogeneous and wide low beam with up to 140 lux lighting power 
• Three-stage high beam can be switched on with up to 200 lux (handlebar switch)
• RX PRO lens optimised for off-road riding
• Lighting width of up to 11 m
• Automatic change between daytime running light and low by means of a light sensor
• Aluminium housing for excellent cooling and high durability
• Incl. handlebar mount 
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h

Technical details:
• Material: aluminium, plastic
• Installation: handlebar (Ø 31.8/35 mm)
• Clamp diameter handlebar switch: Ø 22.2 mm 
• Power supply: from 11 to 16 volts direct current
• Power consumption: 5.5 W (daytime running light), 13.5 W (low beam), 17/22/25 W (high beam levels)
• Lamp: LED
• Lighting power: approx. 60 lux (daytime running light), up to 140 lux (low beam), approx. 200/170/140 (high beam levels)
• Daytime lighting: yes
• Light modes: low beam, daytime running light, high beam 
• Dust- and waterproof in accordance with IP56
• Dimensions: approx. 83 x 50.8 x 52 mm
• Cable length: approx. 1400 mm (power connection), approx. 300 mm (handlebar switch connection cable)
• Weight: approx. 155 g

In the box:
• 1 LITEMOVE RXW-2900 e-bike front light
• 1 high beam switch incl. connection cable
• 1 handlebar mount


Matching LITEMOVE e-bike rear lights at ROSE:
• LITEMOVE TS-RK e-bike rear light for rear racks 50 mm (prod. code: 1612250001)
• LITEMOVE TS-RK e-bike rear light for rear racks 80 mm (prod. code: 1612260001)
• LITEMOVE TSV e-bike rear light (prod. code: 1612240001)
  Compatible LITEMOVE mounts at ROSE:
• LITEMOVE headlight handlebar mount for side mounting (prod. code: 1612220001)
• LITEMOVE headlight handlebar mount universal (prod. code: 1612230001)

Note:
The front light is compatible with a direct current power source (DC) of 11 to 16 volts. Some e-bikes can provide this, but NOT all do!
The light connection of your drive system must provide a rated power of at least 17 watts to operate the headlight.
For the exact voltage supply of your e-bike lighting system, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!

Manufacturer: Litemove, No. 198, Fuya Road, Taichung 40762 , Taiwan, , www.lite-move.com
Responsible person: Litemove Europe c/o futurelectric GmbH, Weissenbrunner Hauptstr. 2, 91227 Leinburg, Germany, info@lite-move.com