SHIMANO ULTEGRA PD-R8200 SPD-SLR Pedal Set

With the PD-R8200, SHIMANO introduces the next generation of its road bike clipless pedals: The SPD-SLR platform offers 2.3 mm less stack height and enables seamless contact between cleat and pedal, bringing your feet closer to the pedal axle than is the case with SPD-SL. As a result, the ULTEGRA PD-R8200 pedals provide you with particularly high pedalling stability and improved power transfer. 
 
The required engagement angle has also been reduced from 17.3° to 10.5° compared to the predecessor. Together with the larger engagement zone, clipping into the PD-R8200 should therefore be even faster and more intuitive. The cleats have also been further developed; they now manage without metal washers and slotted holes and, depending on the version, achieve a weight saving of up to 22% compared to their predecessors. They are compatible with SPD-SL three-hole shoes. However, if you want to take full advantage of the SLR system, you should take a look at the SH-RC910 and SH-RC810 road shoes, which were developed specifically for the SLR system. They allow for a greater adjustment range for the cleats in the longitudinal direction and also clearer markings for precise positioning.
 
As an integrative system, SHIMANO has ideally matched pedals, cleats and shoes for the SPD-SLR platform. As a result, you can benefit from lower stack height, lower weight, easier engagement, more direct power transfer and simplified adjustment options. 
 
Details:
• SHIMANO road bike pedals with further developed SPD-SLR technology
• Only compatible with SPD-SLR cleats (see accessories below)
• 2.3 mm lower stack height than SPD-SL 
• Enables high pedalling stability and efficiency
• Larger engagement zone and smaller engagement angle
• Developed for faster and more intuitive engagement
• Adjustable entry and release tension
• Extra-wide contact surface for high stability and efficiency
• Up to 22% lighter cleats compared to SPD-SL
• Extended and simplified cleat positioning with optional SHIMANO SH-RC910 and SH-RC810 road shoes
 
Technical details:
• Intended use: Road
• Series: ULTEGRA 
• Model: PD-R8200
• Clipless pedal system: SPD-SLR (single-sided)
• Material pedal body: carbon composite
• Material pedal spindle: nickel cromoly steel 
• Engagement angle: 10.5°
• Stack height: 13.3 mm
• Weight: approx. 228 g (pair)

In the box:
• 1 pair of SHIMANO ULTEGRA PD-R8200 SPD-SLR pedals
• 1 pair of SHIMANO CL-SL110 cleats, yellow, with ± 3° angular float
 
 
Note:
These pedals are NOT compatible with SPD-SL cleats. SPD-SLR cleats are, however, compatible with SPD-SL three-hole shoes. If, however, you want to take full advantage of the SLR system, you should consider purchasing separately available SHIMANO shoes for the SPD-SLR system. These allow for a greater adjustment range for the cleats in the longitudinal direction and clearer markings on the shoe sole for precise positioning.
 
Compatible SPD-SLR cleats in the Rose range:
• SHIMANO CL-SL110 SPD-SLR cleats ± 3° (prod. code: 1663560001)
• SHIMANO CL-SL100 SPD-SLR cleats ± 0° (prod. code: 1663550001)

SHIMANO shoes in the Rose range designed for the SLR system:
• SHIMANO SH-RC910 S-PHYRE road shoes (prod. code: 164979)
• SHIMANO SH-RC810 road shoes (prod. code: 165058)
• SHIMANO SH-RC810 NARROW road shoes - narrow version (prod. code: 165064)
• SHIMANO SH-RC810 WIDE road shoes - wide version (prod. code: 165062)

Manufacturer: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com
Responsible person: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, Netherlands, www.shimano.com