Schwalbe Clik Valve Adapter Schrader-Presta

Schwalbe Clik Valves were designed to make tyre inflation child’s play. With this kit, you can convert your Schrader valves to the new standard in not time at all. The adapter is simply screwed onto the Schrader valve.

All you have to do before inflating the tyre is attach an optional Clik Valve pump head to the valve. And that's it already! You can start inflating the tyre immediately. When you are finished, you can simply pull off the pump head again, without the risk of air loss from the tyre or inner tube.

Details:
• Clik Valve adapter for Schrader valves
• Simply screw onto the valve
• Easy inflation by attaching an optional Clik Valve pump head
• Requires only low operating forces
• No pressure loss when removing the pump head from the valve
• Also compatible with many pump heads for Presta valves*

Technical details:
• Material: aluminium, plastic
• Weight: approx. 4.2 g (valve pair with caps)

In the box:
• 1 Schwalbe Clik Valve adapter Schrader-Presta
• 1 cover sleeve


*Note
If you don't have a pump with a Clik Valve pump head at hand, you can often also use pump heads for Presta valves for the Clik Valve. However, this is not possible in every case.

Compatible accessories at ROSE:
• SKS Germany CLIK TEC pump head (prod. code: 2352147)
• SKS Germany AIR-X-PLORER 10.0 floor pump with CLIK VALVE pump head (prod. code: 2352146)

Manufacturer: Ralf Bohle GmbH, Otto Hahn Str. 1, 51571 Reichshof, Germany, www.schwalbe.com