Rose Truing Set 2-Zent.A:-XL Truing Stand + T-Gauge Truing Gauge + Hollow Axle Adapter

The combination of the ROSE 2-Zent.A:-XL truing stand with the T-Gauge truing gauge and the hollow axle adapter is your all-round carefree package for centring wheels.

With this truing set you can centre all common wheels. Thanks to its solid construction, the 2-Zent.A:-XL is designed for frequent use. With its heavy weight, the stand is stable and secure on your workstation. Alternatively, the stand can also be firmly connected to the workbench using screws. The clamping of the hub as well as the adjustment of the centring arms and extension are carried out with ergonomic knobs.

The variable hollow axle adapter by ROSE expands the performance range from quick release skewers to hollow axle hubs. With the corresponding adapter cones of the hub clamp, wheels with thru axles from 9 to 20 mm can be perfectly prepared for alignment and centring work with just a few hand movements. Just push the ROSE hollow axle adapter through the hub and, depending on the axle diameter, affix it on both sides with a compatible cone by screwing it to the axle mount of the centring stand. Fast, accurate and safe – for an optimally centred wheel.

In addition, with the included centring gauge you have the right instrument to check the perfect alignment of the centring stand at any time. The T-Gauge is a practical centring aid for the ROSE 2-Zent.A:-XL truing stand, but can also be used with other compatible models. To check the central and parallel alignment of the centring arms with the rim centring pins, the T gauge by ROSE is hooked into the wheel holder of the truing stand. Now you can precisely check the centre setting or make precise adjustments on the truing stand so that your wheel is perfectly aligned and runs true.

Details ROSE 2-Zent.A:-XL truing stand:
• For wheels from 16" to 29"
• For hub widths up to 148 mm
• For lateral and radial truing
• Material: steel
• Base plate dimensions: W: 20.5 cm/L: 24.5 cm
• Weight: approx. 7.7 kg

Details ROSE T-Gauge truing gauge:
• Symmetrical T-gauge for checking the correct truing stand alignment
• Compatible with the ROSE 2-Zent.A:-XL truing stand
• 4 x 4 mm axle nipples on both sides for mounting wheels in the wheel holder
• Very stable, workshop-quality model
• Hanging hole for the tool wall
• Material: steel
• Dimensions: approx. 340 x 140 x 4 mm
• Weight: approx. 330 g

Details ROSE hollow axle adapter:
• For centring arms with mounting groove Ø 10 mm
• Adapter for hubs with 9, 10, 12, 15 or 20 mm thru axle
• For almost all front and rear thru axle hubs
• Threaded spindle dimensions: Ø 5.5 x 270 mm
• Precisely adapts to the hub diameter due to the cone
• Ensures a secure fit of the hub in the truing stand
• Material: steel, plastic
• Dimensions: approx. 270 x 40 x 40 mm
• Weight: approx. 180 g

In the box:
• ROSE 2-Zent.A:-XL truing stand
• ROSE T-Gauge truing gauge
• ROSE hollow axle adapter


Attention:
The items from the centring set are also available individually:
• ROSE 2-Zent.A:-XL truing stand (prod. code 2000916)
• ROSE hollow axle adapter for truing stands (prod. code 2328852)
• ROSE T-Gauge truing gauge (prod. code 2328849)

The ROSE truing set with 2-Zent.A:-XL truing stand + T-Gauge truing gauge + hollow axle adapter is available under prod. code 2335968.



Manufacturer: Rose Bikes GmbH, Schersweide 4, 46395 Bocholt, Germany, www.rosebikes.de