Fidlock TWIST vario base Bracket for Frame or Fork

The TWIST vario base from Fidlock is a magnetic-mechanical holder for TWIST components that can be attached to both the frame and the fork.

The bracket has four slots to give you maximum flexibility when mounting. It can therefore be screwed onto the bottle cage mount or compatible forks with three attachment points, for example. But even if your bike has fewer mounting points, you can still fit the vario base bracket: The slots on the side allow it to be attached with the cable ties provided. You can combine both mounting options, making the bracket suitable for almost any mounting situation.

Details:
• Magnetic-mechanical TWIST mount for frame or fork
• Can be mounted using screws and in combination with cable ties
• Incl. rubber underlay for paint protection
• Problem solver for forks with only one screw-on point
• Ideal in combination with TWIST uni connector XL (prod. code: 2351747)

Technical details:
• Material: PA66GF, neodymium, epoxy, silicone
• Dimensions: approx. 23 x 152 x 15 mm
• Cable tie dimensions: approx. 430 x 9 mm
• Max. load: 2.5 kg
• Weight: approx. 57 g (complete kit)

In the box:
• 1 Fidlock TWIST vario base bracket incl. mounting material
• 2 cable ties


Tip:
The Fidlock TWIST uni connector XL (prod. code: 2351747) is the ideal addition if you want to attach larger items of luggage to the fork or frame of your bike.

Note:
The TWIST vario base bracket must not be mounted using only cable ties. At least one fixing screw must be used.



Manufacturer: Fidlock GmbH, Kirchhorster Str. 39, 30659 Hannover, Germany, www.fidlock.com