ergotec Hake Stem 80 mm Safety Level 6

A sporty all-rounder: With its slightly angular design and a negative angle of -8°, the HAKE stem fits modern road as well as gravel and travel bikes. In addition to its contemporary, striking design and sporty geometry, the stem is also impressive in terms of stability. With a safety level of 6, ergotec classifies the stem at the upper end of its load scale. 

Details:
• Robust Ahead stem for an athletic riding position
• Intended use: Road, Gravel, Travel
• -8 angle enables sporty position
• Modern design with angular shape
• Sandblasted surface finish
• ergotec Safety Level 6*

General specs:
• Material: aluminium 6061 T6
• Fork Steerer Ø: for threadless forks with steerer outer diameter of 28.6 mm (1 1/8”)
• Handlebar clamp: Ø 31.8 mm
• Max. system weight (cyclist, bike and luggage): Road/Gravel/Travel (also for e-bikes up to a pedal assist of 45 km/h) 120 kg**

Specs 60 mm length:
• Clamping height on steerer tube: approx. 38 mm
• Angle (rise): - 8°
• Length: 80 mm
• Effective length gain: 75 mm
• Effective height gain: - 15 mm
• Weight: approx. 150 g

In the box:
• 1 ergotec HAKE stem, 80mm


* *The product classification of the ergotec Safety Level complies with the DIN EN ISO 4210 standard for bikes and DIN EN 15194 for e-bikes. The ergotec Safety Level is always valid for the entire steering system. If stem and bars have a different safety level, the lower value will apply to the entire system.

** For other types of bicycles other permissible total weights may apply. You can find these when clicking the button below or in the assembly and safety instructions included with the stem.

ATTENTION:
Due to safety concerns, the manufacturer does NOT approve the use of the stem with carbon handlebars and/or carbon steerer tubes.

Manufacturer: Wilhelm Humpert GmbH & Co. KG, Erlenstrasse 25, 58739 Wickede/Ruhr, Germany, www.ergotec.de