Trelock LS 990 Lighthammer Pro 250 E-Bike Headlight with Daytime Running Light and High Beam

The LS990 Lighthammer Pro 250 is one of Trelock's top-of-the-range e-bike front lights. It boasts a very high light output, a switchable high beam and a sensor-supported automatic function for the daytime running light and low beam. A low beam of 200 lux lighting power leave no doubt that this headlight can turn night into day even on completely unlit roads or forest paths. The handlebar control can also be used to switch on a 250 lux high beam for excellent long-range vision.  During the day, the cyclist is assisted by a clearly visible daytime running light. Thanks to an ambient light sensor, the LS 990 Lighthammer Pro 250 can automatically switch between daytime running light and low beam. In Waiting mode, when the bike is at a standstill, the front light reduces its light output by 50% in order to save battery power. The headlight automatically switches back to full power when you ride off. In City mode, the headlight detects artificial light sources and the light output is reduced by 25%. With these features, the LS990 Lighthammer Pro 250 combines maximum performance with smart automatic functions, making it ideal for use on your e-bike. Details:
• Powerful e-bike front light with switchable high beam
• Homogeneous and wide light field
• Up to 250 lux lighting power in High Beam mode (can be switched on via handlebar control) 
• Bright dipped beam with close-range illumination
• Level mode enables optimum lamp alignment 
• Sensor-controlled daytime running light with automatic switching to low beam
• Waiting and City mode conserve battery reserves (can be deactivated)
• Robust aluminium housing with excellent heat dissipation
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h Technical details:
• Material: aluminium (lamp housing, handlebar mount)
• Installation: Handlebar mount for lamp body (Ø 31.8 and Ø 35 mm), handlebar mount for control unit (Ø 22.2 mm) 
• Power supply: 12 V direct voltage* 
• Power consumption: 9 W (low beam), 16 W (high beam)
• Lamp: LED
• Lighting power: approx. 200 lux (low beam), 250 lux (high beam)
• Lateral visibility: yes
• Daytime lighting: yes
• Light modes: low beam, high beam, daytime running light, Waiting and City mode
• Weight: approx. 220 g In the box:
• 1 Trelock LS 990 Lighthammer Pro 250 e-bike headlight
• 1 handlebar control
• 2 handlebar mounts 
• 1 faceplate adapter 
*Note:
The front light is compatible with a direct current power source (DC) of 12 volts. Some e-bikes can provide this, but NOT all do!
For the exact voltage supply of your e-bike lighting system, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!
The connection cable of the front light has two open cable ends. Depending on the e-bike drive, these can be connected to the motor of your e-bike either directly or using a separately available, manufacturer-specific plug. Tip:
You can find a replacement bracket for the headlight under prod. code: 2354206.
If you want to attach the headlight to the fork of your bike, you can find the right bracket under prod. code: 2354207.

Manufacturer: Allegion Netherlands. B.V., Energiestraat 2, 3903 AV Veenendaal, Netherlands, trelock.de/