Topeak MTX Beam II Rack E-Type Seat Post Luggage Rack

The improved MTX BEAMRACK II seat post carrier from Topeak is slightly longer and wider than its predecessor. In the E-Type version, it was specially designed for medium frame geometries and is particularly suitable for 29" mountain and gravel bikes in frame sizes S to L.

Of course, the rack still has the practical attachment option for Topeak MTX QuickTrack bags and baskets. However, you can also convert the dual-side luggage platform for accessories with MIK adapter plates. If you only want to attach an item of clothing or other light objects to the carrier for a short time, you can also use the integrated elasticated straps.

Details:
• Stable seat post carrier for medium frame geometries (suitable for frame sizes S to L)
• MTX fastening platform for separately available Topeak MTX TrunkBags bags and baskets
• Simple conversion enables attachment of accessories with MIK adapter plates
• Integrated rubber straps for quickly attaching lightweight items of luggage
• Including red reflector on the rear 

Technical details:
• Material: aluminium, plastic
• Type: E-Type (for frame sizes S to L) 
• Dimensions: approx. 53.9 x 12 x 12.9 cm 
• Maximum load: 9 kg
• Rear light mount: for rear lights with 80 mm bolt spacing or clip fastening
• For seat post Ø: 25.4–31.8 mm 
• Weight: approx. 673 g

In the box:
• 1 Topeak MTX Beamrack II E-Type seat post luggage rack
• 1 safety reflector 
• 1 luggage strap
• 1 spacer sleeve for adaptation to Ø 25.4-31.8 mm seat posts
• 2 rear light mounts (Taillight and RedLite mount)
• 2 Dual-Side Panel Support Pads (compatible with MTX QuickTrack® & MIK adapter plates)


ATTENTION:
The product must NOT be attached to carbon or Vario seat posts. The luggage rack is NOT approved for the installation of a child seat! The MTX Beamrack II must NOT be used for transporting people!

Note:
The product increases visibility, but is not a substitute for adequate bicycle lighting and does not comply with paragraph 67 of the StVZO for lighting equipment on bicycles in Germany. The use outside Germany is regulated differently from country to country. Please inform yourself about the valid regulations in your country.
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.

Tip:
If you want to use an MTX TrunkBag with fold-out side bags on the Beamrack II, you also need the Topeak MTX Dual Side Frame side carrier system for BeamRack II seat post carriers (prod. code: 2352553).
The matching mudguard for mounting underneath the Beamrack luggage carrier can be found under prod. code: 2352554. 

Manufacturer: Topeak Inc, 8F-4, NO.20, Ta Long Road Taichung, Taiwan, www.topeak.com/de/de
Responsible person: RTI Sports GmbH, Am Autobahnkreuz 7, 56072 Koblenz, Germany, www.topeak.com/de/de