MAVIC E-Crossride 1 MTB Rear Wheel 29", 12 x 148 mm, SHIMANO HG

The Mavic E-Crossride 1 rear wheel was specially developed for use on e-mountain bikes and impresses with its high stability, durable construction and reliable function under demanding conditions. Thanks to its e-bike-specific design, the wheel is optimised for the increased loads caused by torque and system weight. 

The system wheel has a reinforced rim construction as well as a customised number of spokes and geometry. This design ensures high rigidity and durability even with intensive off-road use. The integrated pinch flat protection also reduces the risk of punctures and tyre damage. 

Equipped with the proven Instant Drive 360 freewheel system, the Mavic E-Crossride 1 offers direct power transfer and efficient propulsion. The system works with a double-tooth sliding mechanism and enables fast traction with low rolling resistance. The high-quality QRM Auto bearing ensures automatic bearing preload and permanently smooth running without play. 


Top technologies:
• ID 360 Instant Drive: A lightweight and low-friction Dual Ratchet freewheel system for explosive propulsion and reliable power transmission. 
• PFP (Pinch Flat Protection) A specific rim design with a wide overhanging rim flange for more contact surface with the tyre, which is intended to minimise the risk of punctures due to higher weight and increased drive force of e-MTBs in the event of punches or side contact.
• UST tubeless technology: The Mavic standard for tubeless tyres not only improves traction, comfort and rolling resistance, but also reduces the risk of tyre defects.
• QRM Auto (Qualité de Roulements Mavic Auto): Smooth-running, double-sealed and maintenance-free industrial bearings with high dimensional accuracy and self-adjusting bearing preload.
Technical details:

Rim:
• Wheel size: 29“
• Rim material: S6000 aluminium
• Rim profile: hookless 
• Rim type: clincher 
• Brake type: Disc brakes 
• Valve type: Presta valve (Ø 6.5 mm)  
• Rim depth: approx. 21 mm
• Rim width: approx. 35 mm
• Inner rim width: 30 mm 
• ETRTO: 622 - 30
• UST tubeless ready

Spokes and nipples: 
• Spokes: Round spokes (J-bend)
• Spoke material: stainless steel 
• Number of spokes: 32 pieces
• Lacing: 3-cross
• Nipples: Steel, ABS, black

Hub body:
• Hub type: Mavic CLASSIC Hub
• Hub material: aluminium hub body, aluminium axle
• Brake disc mount: IS 6-bolt 
• Freewheel: robust Instant Drive 360 freewheel system (toothed disc system) 
• Bearings: self-adjusting, sealed cartridge bearings (QRM Auto)

Axle:
• Hub width: 12 x 148 mm (BOOST thru axle)  

Freewheel body standard: 
• SHIMANO HG Spline M

Cassette compatibility: 
• SHIMANO 8-/9-/10-speed Road/MTB, 11-speed MTB cassettes 
• SRAM 8-/9-/10-speed Road/MTB cassettes 
as well as other SHIMANO HG-compatible cassettes

Weight:
• Weight rear wheel: approx. 1185 g 

Clearance:
• Minimum tyre size: 52 mm (max. 2.35 bar / 34 psi)
• Maximum tyre size: 125 mm (max. 1.25 bar / 18 psi)
• Recommended max. system weight: 150 kg (cyclist, bike, gear and luggage)
• Intended use - ASTM Category 3: For off-road use with jumps up to 61 cm


In the box:
• 1 Mavic E-Crossride 1 MTB rear wheel SHIMANO HG
• 1 Mavic UST valve 


Note:
Mavic UST wheels may also be used with inner tubes in the standard version.
Please make sure to fill the tyre with sufficient sealant before using the Mavic UST wheels tubeless!

Manufacturer: Mavic Group SAS, Parc Altais, 44 Rue Saturne, 74650 Chavanod, France, www.mavic.com