B + M Briq-M E Highbeam Headlight With High Beam and Bluetooth Remote Control

The Briq-M E Highbeam is a modern e-bike headlight from Busch + Müller with a lighting power of up to 200 lux when the high beam is switched on. In dipped beam mode, the headlight impresses with up to 150 lux. In doing so, the Briq-M E Highbeam casts a homogeneous and very wide light pattern onto the road. 
 
The front light is controlled via the supplied BLUCON Bluetooth handlebar control unit with two buttons. At the touch of a button, you can activate the high beam and deactivate it just as quickly to avoid dazzling oncoming traffic. The dipped beam can also be regulated in three power levels. Furthermore, you can switch between 'Road' and 'Offroad' modes using the switch. 
 
In the busch+müller app, with which the headlight can be connected via Bluetooth, you can also make further settings. For example, for road mode, you can determine what the percentage light distribution between near and far beam should be when you activate the high beam. You can also do the same for offroad mode. However, this also offers a panorama high beam, which shines even further upwards than the regular high beam and can prove to be an advantage, especially in dense vegetation.
 
The Briq-M E Highbeam also features a light ring, which is integrated along the edge of the lamp reflector and serves as a daytime running light. The powerful electronics are securely packed in the robust aluminium housing, which also serves as a cooling system.
 
Details:
• Programmable, powerful e-bike front headlight with high beam and remote control
• Homogeneous and wide low beam with up to 150 lux lighting power
• Up to 200 lux in the switchable high beam
• BLUCON Bluetooth remote control and light modes can be freely programmed (app required)
• Clearly visible light ring along the edge of the lamp reflector
• Aluminium housing for excellent cooling and high durability
• Incl. front reflector that can be attached without tools
• Universal connection cable with open ends
• Approved for all licence-free e-bikes/pedelecs according to German road traffic regulations StVZO

Technical details:
• Material: aluminium, plastic
• Installation: handlebar (Ø 31.8 / 35 mm)
• Power supply: from 6 to 42 V DC (direct current) 
• Power consumption: 16 W (can be programmed up to 24 W)
• Lamp: LED
• Lighting power: up to 150 lux (low beam), up to 200 lux (high beam)
• Light modes: Dipped beam, high beam, panorama high beam
• Dimensions: approx. 80 x 57 x 65 mm
• Weight: approx. 200 g 
 
In the box:
• 1 Busch+Müller Briq-M E Highbeam headlight
• 1 handlebar mount
• 1 BLUCON Bluetooth handlebar switch
• 1 mount for handlebar switch
• 1 connection cable
• 1 front reflector

Tip:
You can find the busch+müller app for your smartphone in either the Google App Store (Android) or the Apple App Store (iOS).

Note:
The front light is compatible with a direct current power source (DC) of 6 to 42 volts. Some e-bikes can provide this, but NOT all do!
For the exact voltage supply of your e-bike lights, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!
The connection cable of the front light has two open cable ends. Depending on the e-bike drive, these can be connected to the motor of your e-bike either directly or using a separately available, manufacturer-specific plug.

Manufacturer: Busch & Müller KG, Auf dem Bamberg 1, 58540 Meinerzhagen, Germany, www.bumm.de/