Maxxis Ikon TR EXO MaxxSpeed MTB Folding Tyre

With its combination of high volume, fast rolling behaviour and grip, the MAXXIS Ikon is designed for XC and trail use on a wide variety of terrain. The tread design offers a balanced ratio of efficiency, control and traction.

The Ikon works on hard to loose surfaces and is suitable for both front and rear wheels. Its predictable handling and versatile design make it a reliable all-rounder for fast XC laps, long tours and varied trails.

In this version, the Ikon combines EXO Protection with the MaxxSpeed rubber compound for cross-country and trail use with a focus on low weight, reduced rolling resistance and high efficiency on fast XC routes and versatile trails.


Technologies:

• EXO PROTECTION
EXO Protection is an extremely cut- and abrasion-resistant protective layer on the sidewall of selected MTB, Gravel and Metro tyres from MAXXIS. The tightly woven material is designed to be both light and flexible, so that the performance of the tyres is affected as little as possible.

• MaxxSpeed
MaxxSpeed is a high-silica rubber compound from MAXXIS for XC racing. The compound is designed to reduce rolling resistance compared to 3C MaxxSpeed and also improve wet grip. In the laboratory test, rolling resistance was measured to be around 25 % lower than 3C MaxxSpeed with identical tread, tyre construction and air pressure.

• TUBELESS READY [TR] 
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.

Technical details:
• Intended use: Cross-Country (XC), Trail 
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 120 TPI
• Puncture protection: EXO PROTECTION
• Rubber compound: MaxxSpeed

Dimensions:
ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*: 
60-584 / 27.5 x 2.35“ / ---- / approx. 780 g / max. 4.1 bar (59 psi) / 90 kg / E25
57-622 / 29 x 2.20“ / ---- / approx. 735 g / max. 4.1 bar (59 psi) / 90 kg / E25
60-622 / 29 x 2.35“ / ---- / approx. 840 g / max. 4.1 bar (59 psi) / 90 kg / E25
61-622 / 29 x 2.40“ / ---- / approx. 835 g / max. 4.1 bar (59 psi) / 90 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75). 
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Ikon TR EXO MaxxSpeed MTB folding tyre

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com