LIVALL MT1 NEO Bicycle Helmet

The MT1 NEO from LIVALL is equipped with everything you need in terms of safety and comfort for the saddle of your bike. Brake lights and the anti-loss alarm are additions to the technology setup.
The sound equipment for the helmet's communication with the smartphone has also been improved. A more sensitive microphone and revised loudspeakers ensure a rich sound, whether you’re listening to your favourite playlist, navigation announcements or a telephone call. Each acoustic transmission comes in a new sound quality without blocking out the ambient noise.
The indicator function and the rear light are of course still on board. And as usual, the lighting package can be controlled with one finger via the handlebar remote control without taking your hands off the handlebar. That's smart safety for smart bikers!

Details:
• Integrated HiFi stereo speakers in the helmet above the ears
• Wind-protected microphone
• Operation by means of buttons on the helmet to regulate the volume
• Bluetooth connection to the free Livall App: answer calls, play music, walkie-talkie function for group communication, switch rear lights on and off, send SOS signal, record and analyse tours
• Comes with BR80 remote control for mounting on the handlebar – through a Bluetooth connection with the smartphone, you can receive calls, take photos, play music, control rear lights, listen to the navigation system, use the walkie-talkie function, raise or lower the music volume or send an SOS signal
• Brake lights – when the speed of your bike decreases, the sensor system integrated in the helmet detects the deceleration and activates the brake lights
• LED flashing lights at the back, can be switched on via the remote control for turning instructions
• ANTI-LOSS alarm
• Size adjustment dial at the rear part of the helmet
• 21 vents
• Integrated insect net
• Removable and washable helmet padding

Technical details:
• EN1078
• Weight: approx. 320g (for size 55-61)
• Battery: 380mAH battery, up to 10 hours operating time, approx. 180 days standby, approx. 2 hours charging time
• Connections: magnetic charging port (USB to magnetic plug), charging socket (5V/0.5A)
• Bluetooth: BLE4.0+ HFP/HSP/A2DP, up to 10m range

In the box:
• 1 LIVALL MT1 NEO bike helmet

Highlights & Technologies:

SOS alert:
With the LIVALL EVO21 fall detection feature you’ll have a personal guardian angel on board for every tour. The helmet's sensor system detects falls from a height of 1.50 metres and automatically sends an emergency signal 90 seconds after the fall to the previously stored telephone number, including the exact GPS position of the accident site. If a fall occurs without serious injury or consequences, the false alarm can be stopped within 90 seconds – so as not to cause unnecessary concern.

ANTI-LOSS:
The anti-loss alarm will sound when the Bluetooth connection between smartphone and helmet breaks. This guarantees that neither the helmet nor the mobile phone are accidentally left behind after you take a break.

Tip:
- Functions of the buttons on the Livall remote control -

• Button Up – a short press on this button switches to the next song
• Button Left – indicator left
• Button Right – indicator right
• Button Centre – pressing the centre button switches between play/pause during music playback or between answering/ending a call. With a long press of the centre button, a call is rejected. A double click starts redialling the last number.
• Button Down – a short press switches to the previous song

• Taking a photo – press the photo button of the remote control once This activates the camera mode of your smartphone. Pressing the button again takes the picture (You must be connected to the LIVALL RIDING APP for this).

• Walkie Talkie Button – press and hold this button to talk to your group members (Make sure you are connected to the LIVALL APP).

To use the walkie talkie function, please proceed as follows:

1. Open the Livall Riding App
2. Tap Group in the bottom row
3. Open a group by tapping on the "+"
4. Set an individual 6-digit number sequence
5. Confirm the group "OK"
6. The other group members now only have to enter your 6-digit code and confirm it.
7. For a conversation, you must now press and hold the button on the remote control. Please wait until you hear a beep before starting to speak. As soon as you have finished speaking, release the button. Now your group members can answer you. Please always wait for the “signal tone” before you speak.



Manufacturer: Livall Tech. Co. Ltd., 4th Floor, Building 8, No. 919 Hua Wei Road, CN 519000 Zhuhai, China, www.livall.com
Responsible person: CicloSport K.W. Hochschorner GmbH, Robert-Stirling-Ring 1, DE 82152 Krailling, Germany, www.livall.dewww.ciclosport.com