- SKU
- 227159901
- Abstract Product Id
- 97051
- Concrete Product Id
- 387494

H-1700 Spline 30 Disc BOOST E-MTB wheels
524,00€
RRP
698,00 €
Precio IVA incluido más 2,95 € (de envío a España)
Talla
-
Color: schwarz
Estock en la tienda
Vas a comprar el modelo standard.
Tu configuración no se ha guardado.
Si quieres comprar una bici customizada, pincha aquí.
With the H-1700 Spline 30 Hybrid wheelset, DT Swiss responds to the special demands electric mountain bikes for all mountain use place on their components. The motor’s high torques and the comparably high system weight puts considerably more load on your wheels on rough trails up- and downhill than a standard mountain bike without electric assistance. Thanks to many years of experience in wheel construction and modern test and analysis methods, DT Swiss has developed special hybrid components that are far superior to conventional MTB components with regards to durability and resistance – and without suffering from overweight.
By combining these special components, the DT Swiss H-1700 Spline 30 hybrid wheelset is a strong and reliable partner for your e-mtb.
The DT Swiss Hybrid hub for e-mtbs not only withstands torques of 500 Nm, but is also approved for a system weight of 150 kg. The maximum bearing load is 4100 Nm.
Details:
· Oversized hub shell with increased wall thickness and reinforced spoke interfaces
· Oversized cartridge bearings
· High load axles
· Robust and resistant steel freehub body
· E-bike specific steel ratchet system with 24 teeth for quick engagement at high torques
DT Swiss Hybrid spokes exceed the MTB test standard for tensile strength by up to 35% – without significant weight gain.
Details:
· Specifically butted (2,34 mm x 1,8 mm x 2,0 mm)
· Reinforced spoke heads
· Optimized strength-to-weight ratio
· High-end steel alloy
· Approved for a system weight of 150 kg
DT Swiss Hybrid rims withstand up to 20% higher spoke pull out forces than DT Enduro rims.
Details:
· Specially designed rim profiles with increased wall thickness and increased strength where it is needed
· PHR technology and spoke holes with eyelets
· Approved for a system weight of 150 kg
Specs:
Rims:
· Rim material: aluminium
· Rim height: 20 mm
· Rim width: 35 mm
· With eyelets
· ETRTO 27,5": 584x30C
· ETRTO 29": 622x30C
· For Presta valve (Ø 6.5 mm)
· Tubeless ready
· Recommended tyre width: 1.85" - 3.5"
Spokes and nipples:
· Type of spokes: DT Swiss Hybrid 1 StraightPull, black
· Number of spokes: 28 pcs each
· Lacing: 3-cross
· Nipples: DT Swiss Pro Lock Squorx, black
Front hub body:
· Reinforced DT Swiss Hybrid hub (350 based)
· 2 cartridge bearings, sealed
· Oversized bearings
· Aluminium hub body
· 6-hole brake disc mount
Rear hub body:
· Reinforced DT Swiss Hybrid hub (350 based)
· 4 cartridge bearings, sealed
· Oversized bearings
· Aluminium hub body
· 6-hole brake disc mount
· DT Swiss Hybrid Ratchet System, 24 teeth
· Front axle: Boost 15 x 110 mm TA (thru axle)
· Rear axle: Boost 12 x 148 mm TA (thru axle)
Compatibility:
· Shimano/SRAM 9-/10-speed Road
· Shimano/SRAM 9-/10-/11-speed MTB
Weight:
· Weight 27,5": front wheel: approx. 959 g; rear wheel: approx. 1131 g
· Weight 29": front wheel: approx. 1012 g; rear wheel: approx. 1183 g
· ASTM classification: 4 (for rough off-road riding and jumps less than 121 cm)
· Max. system weight: 150 kg
In the box: front and rear wheel, tubeless ready tape and tubeless valves
- product.attribute.tubeless_ready:
- Sí
- product.attribute.gtin:
- 2002271599014
- product.attribute.einbaumass_laufrad:
- 15 x 110 mm, 12 x 148 mm
- product.attribute.freilaufkoerper:
- Shimano/compatible with Shimano/SRAM