H-1700 Spline 30 Disc BOOST E-MTB front wheel

With the H-1700 Spline 30 Hybrid front wheel, DT Swiss responds to the special demands electric mountain bikes for all mountain use place on their components. The motor’s high torques and the comparably high system weight puts considerably more load on your wheels on rough trails up- and downhill than a standard mountain bike without electric assistance. Thanks to many years of experience in wheel construction and modern test and analysis methods, DT Swiss has developed special hybrid components that are far superior to conventional MTB components with regards to durability and resistance – and without suffering from overweight.
By combining these special components, the DT Swiss H-1700 Spline 30 hybrid front wheel is a strong and reliable partner for your e-mtb.

The DT Swiss Hybrid hub for e-mtbs is approved for a system weight of 150 kg.
The maximum bearing load is 4100 Nm.
Details:
· Oversized hub shell with increased wall thickness and reinforced spoke interfaces
· Oversized cartridge bearings
· High load axles

DT Swiss Hybrid spokes exceed the MTB test standard for tensile strength by up to 35% – without significant weight gain.
Details:
· Specifically butted (2,34 mm x 1,8 mm x 2,0 mm)
· Reinforced spoke heads
· Optimized strength-to-weight ratio
· High-end steel alloy
· Approved for a system weight of 150 kg

DT Swiss Hybrid rims withstand up to 20% higher spoke pull out forces than DT Enduro rims.
Details:
· Specially designed rim profiles with increased wall thickness and increased strength where it is needed
· PHR technology and spoke holes with eyelets
· Approved for a system weight of 150 kg

Specs:
Rims:
· Rim material: aluminium
· Rim height: 20 mm
· Rim width: 35 mm
· With eyelets
· ETRTO 27,5": 584x30C
· ETRTO 29": 622x30C
· For Presta valve (Ø 6.5 mm)
· Tubeless ready
· Recommended tyre width: 1.85" - 3.5"

Spokes and nipples:
· Type of spokes: DT Swiss Hybrid 1 StraightPull, black
· Number of spokes: 28 pcs
· Lacing: 3-cross
· Nipples: DT Swiss Pro Lock Squorx, black

Hub body:
· Reinforced DT Swiss Hybrid hub (350 based)
· 2 cartridge bearings, sealed
· Oversized bearings
· Aluminium hub body
· IS 6-hole brake disc mount

· Axle: Boost 15 x 110 mm TA (thru axle)

Weight:
· Weight 27,5": approx. 959 g
· Weight 29": approx. 1012 g
· ASTM classification: 4 (for rough off-road riding and jumps less than 121 cm)
· Max. system weight: 150 kg

In the box: front wheel, tubeless ready tape and tubeless valve