The single bolt clamping head on this WCS seat post makes both installation and adjustment of the saddle angle quite easy. The low profile clamp mechanism prevents contact with the saddle shell and ensures a tidy appearance. The use of TR741 3D forged aluminium makes it rigid and lightweight, also making it a good choice for racing bikes, MTB and ATB. · length 350 mm (Ø 27,2 mm), 400 mm (Ø 31,6 mm) · offset to the back: approx. 20 mm · weight for Ø 27,2 mm approx. 230 g · available in Ø 27,2 or 31,6 mm Please specify diameter. Note: Not suitable to mount saddles with very oval frame tubes. Suitable saddles in our range are marked accordingly.
The WCS Carbon Link FlexLogic seat post is not just light and visually appealing, but it also has a vertical connection between the seat post and the head, giving the seat post up to 15% more damping, without a loss of side and torsional rigidity. · material: seat post: carbon, clamping head: aluminium · length: 300 mm · offset to the back: approx. 15 mm · weight for Ø 27,2 mm: approx. 155 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
· material: Carbon-fibre with aluminium head · length: approx. 280 mm · minimum insertion depth: approx.70 mm · offset to the back: 25 mm · weight: approx. 224 g (Ø 31,6 mm) · available in Ø 27,2 or 31,6 mm Please specify diameter!
The Evolve is characterised by its oval seat tube and its saddle clamp head which can adjusted in several ways. The innovative clamp head makes it easy to adjust for the optimal setting. The side clamping of the saddle rails directs the force into the clamp instead of the screw. The surface is bead blasted and anodised and resists damage. · material: clamp head: aluminium 6061, seat post: aluminium 2014 3D forged · length: Ø 27,2 and 31,6: 350 mm, Ø 30,9: 375 mm · offset to rear: approx. 19,5 mm · weight for Ø 27,2 mm: approx. 265 g · available in Ø 27,2, 30,9 or 31,6 mm Please specify diameter. Please note. Not suitable for saddles with very oval frame tubes. Corresponding saddles in our range are marked.
The Ritchey seatpost WCS TT adjustable allows the rider to adopt various seating positions, since the offset can be varied over a range from -5 to +20 mm. The offset to the front is particularly interesting for time trial cyclists and triathletes. · 1 bolt side clamping · material: aluminium 2014 3D-forged · offset to the back: approx. 20 mm, to the front: approx. 5 mm · length: 350 mm · weight for Ø 27,2 mm: approx. 263 g · available in Ø 27,2 or 31,6 mm Please specify diameter! Note: Not suitable for mounting saddles with very oval frame tubes. Suitable saddles in our range are marked accordingly.
The vertical FlexLogic connection between seat post and clamping head increases the damping capacity by up to 15% and helps the rider overcome rough ground more comfortably. · material: aluminium 7050 3D-forged · length: 400 mm · offset to the back: approx. 15 mm · weight for Ø 27,2 mm: approx. 253 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
· with large quick-release for easy attachment · available in Ø 34,9 mm · available colour: gold or red Please specify colour!
Seat tube clamp with an extra wide clamping lever for a good grip. Its long collar guarantees reliable clamping. Thanks to its high-quality clamping mechanism, the force is distributed evenly, without loss. · for frame outside Ø 36,0 mm
The square shaft of the Xtreme Comp spring seat post is securely fixed in the supporting tube. It is subject to minimal wear only and will not twist. The release torque can be adjusted easily with an Allen key at the lower end of the seat post. Thanks to the scale on the supporting tube it is a lot easier to find your individual seating position again. · saddle tilt smoothly adjustable · suspension and damping: steel spring/ elastomer · made of 6061 T6 aluminium · length: 350 mm · spring travel: 40 mm · height of top part: approx. 95 mm · for riders from 55 - 100 kg · weight: approx. 456 g · Ø 25,4 mm
Reasonable lightweight construction with a first class mechanical processing - those are the characteristics of the Xtreme WCR SP-02 seat post. The tube that is ovalized inside absorbs the clamping forces evenly and minimizes the risk of a contraction by the saddle clamping. The robust, matt surface avoids effectively a buildup of ugly grooves. The user-friendly, revised saddle clamping secures the desired saddle position perfectily via two M6 screws. - insertion depth scale - material: 7075 aluminium - length: 250 mm · weight for Ø 31.6 mm: approx. 198 g Diameter: 31.6 mm
· 2-screw-clamp · available in Ø 32,0 or 35,0 mm · available colours: shiny black or matt black Please specify colour and diametre!
ROSE seat post clamp with quick-release (Rose logo) chrome 34.9 mm