Light-weight aluminium rack, full of innovative solutions. The oval aluminium profiles of the base plate and the elegantly bent round bars of the fixing system create enormous stability. By means of a ball head screw that engages into prefabricated hollows, height adjustment is comfortably and easily possible for 26" or 28" bikes. The reflector mount is placed favourably, so that it is surpassed by the profiles of the base plate. A reflector or a mounted lamp cannot be damaged if the bike falls or it collides with another one. Its elegant look makes it a real eye-catcher. · with optional bandage set (item no. 1147788, p. 391) also mountable on bikes without eyelets · material: aluminium · broad bag support · variable frame fastening · with spring flap and tension strap eyelets · with rear light/reflector mount (hole distance 50/80 mm) · suitable for 26" and 28" bikes · weight: approx. 720 g · max. load capacity: approx. 25 kg · tube cross-section pack bag mount: approx. 12 x 7 mm (price without decoration)
Weighing only around 586 g, this seat post carrier is a light and practical transport aid. Transport items comfortably, thanks to adjustable rubber straps and a hard plastic plate in the loading area. · load capacity: max. 10 kg · can be attached either with a quick-release or with the included screw (increased theft protection) · suitable for seat post Ø 25,4 - 31,8 mm · integrated rear light holder for hole distance 50 and 80 mm · material: aluminium 6061-T6 · tube Ø pack bag mount: approx. 8 mm Caution: Not suitable for carbon seat posts!
Very light and sporty rear rack. The attachment requires two drillings at the upper end of the rear stay, which makes it more buckling resistant and shock- and vibration-absorbing. · with optional bandage set (item no. 1147788, see p. 391) also mountable on bikes without eyelets · material: aluminium · mount for tension straps · with rear light/reflector mount (hole distance 50/80 mm) · suitable for 26" and 28" bikes · weight: approx. 560 g · max. load capacity: approx. 25 kg · tube Ø pack bag mount: approx. 10 mm (price without decoration)
Simple design, elegant and able to carry a heavy load. The Fold-it can take loads of up to 25 kg and can be adjusted easily to 26" or 28" frames thanks to its adjustable foot plates. Its rear light mount is displaced inwards so that the light is well protected. · compatible with all Snap-it components · material: aluminium · incl. mount for clamp pumps with a compressed length of approx. 23,5 cm · suitable for rear lights with a bolt distance of 50 or 80 mm · weight: approx. 700 g · tube Ø pack bag mount: approx. 10,5 mm
This elegant shiny black packhorse will give any bike a makeover. The freely adjustable terminals mean that it can be fastened to virtually any bike. Its height can be adjusted via a 6-hole rail. The lowered pack bag mount creates a low centre of gravity, so that road handling is affected as little as possible. The carrier can also continue to be used as normal. Things can be clamped and transported securely under the tight spring clamp. The rear light is positioned securely behind the wide stabilisers, protecting it from damage. · material: aluminium · variable frame fixing · with spring clamp · with rear light/reflector mount (hole distance 50/80 mm) · suitable for 26" and 28" bikes · weight: approx. 885 g · max. load capacity: approx. 25 kg · tube Ø pack bag mount: approx. 10,5 mm
Features as described under item no. 1913640, but for longer tours. Panniers can be attached to the side rails. Larger bags can also be transported safely with the optional Thule Side Frames (item no. 1913668). · tube Ø pack bag mount: approx. 10 mm · weight: approx. 1080 g
The uncompromising rack for seat posts! Snap closure for quick mounting at virtually every bike. Proven a thousand times over! Bayonet fastener with quick-release, rubber pads for mounting without damage (Ø 25,4 - 31,8 mm); stable oversize tube construction; strong: load capacity up to 9 kg; MTX rail system for mounting Topeak MTX TrunkBags; incl. tension belt and reflector; weight: approx. 680 g; material: aluminium; dimensions: approx. L: 540, W: 127, H: 81 mm
The Velomann is very easily operable and thanks to its large adjustment range, it is suitable for different wheel bases. Suitable for all rectangular traverses with max. 40 mm width, for road bikes and MTBs (also with disc brake system - except for postmount), length-adjustable over a range of 90 mm, serially lockable, incl. extra strong front wheel quick-release, complete front and rear mount. Attention! Not suitable for forks with a thru axle mount! (price without roof carrier)
You surely know this problem: after transporting your bicycle on the roof of your car, you just want to start cyling, but then you notice that the handlebar and saddle are covered in dirt, such as dead flies and excrement. Make this problem a thing of the past with the Xtreme bike protector. All relevant parts of your bike are shielded from dirt. The protector can be washed at 30°C. · suitable for road bikes, ATBs and MTBs (26", 27,5" and 29", max. handlebar width: 700 mm) · material: 80% polyamide, 20% elasthane · 1 piece
Very lightweight rack with a tapered profile, predestined for road and sports bikes with race brakes. Thanks to its spring flap, you can quickly clamp for example a rain jacket on it. · with optional set of mounting clamps (item no. 1147788), can also be mounted on bikes with no eyelets · material: aluminium · with rear light/reflector mount (hole spacing 50/80 mm) · suitable for 26" and 28" bikes · weight: approx. 544 g · max. load approx. 15 kg · tube Ø pannier mount: approx. 10,5 mm (price without decoration)
Besides a low weight and high stability, the S.P.R. II seat post carrier has a spring clamp that can be removed with a snap ring. The length of the carrier can be adjusted (fig. 1) and offers a mounting surface for rear lights (long hole for 50 mm and 80 mm drilling distance). Attached to the seat post with a bayonet lock with quick-release (seat post Ø 25,4 to 31,8 mm). · weight: approx. 1050 g · load capacity: max. 10 kg · tool-free mounting · material: aluminium · tube Ø pack bag mount: approx. 10 mm Caution: Not suitable for carbon seat posts!
The Add-it is the workhorse of the Racktime carrier range. It can take a load of up to 30 kg and fits all Snap-it components. The carrier has a second rail lower down that luggage bags can be suspended from. This lowers the centre of gravity which has a positive effect on riding behaviour and the bag covers are situated at the height of the loading area. The rear light is perfectly protected with Add-it. · material: aluminium · suitable for 26" and 28" bikes · suitable for rear lights with a bolt distance of 50 or 80 mm · weight: approx. 740 g · tube Ø pack bag mount: approx. 10 mm
Protects you and your vehicle from dirt, when transporting or storing the Thule EasyFold bike carrier, item no. 1907667 · Material: 100% polyester
The Thule Side Frames allow even large pack bags to be attached to the Tour Rack (item no. 1913659). The mounting struts can be mounted at two different heights, so that the bags can also be fastened very low down (lowrider). The Side Frames support the bags on the sides, effectively preventing them from wobbling or swaying. · tube Ø pack bag mount: approx. 10 mm · 1 pair (price without rack)
Weighing only approx 281 g, yet able to carry up to 30 kg, the Tubus Airy borders on the limits of what is technical feasible. Titanium is extremely difficult to machine, can be cut only with specially hard tools and has to be welded in an inert gas atmosphere. Titanium is extremely weather-resistant and very strong, which makes the Airy virtually indestructible. · material: titanium · suitable for 26" and 28" · max. load 30 kg · tube Ø pannier mount: approx. 10 mm · can be mounted with either 1 or 2 strut fixings
A real pack animal with an extravagant look. Thanks to its deep-sitting pack bag mount, the barycentre of the luggage is reduced, which allows more directional stability and optimal use of the upper loading area. The robust CroMo steel tube construction with resistant anodisation can take loads of up to 40 kg, making it suitable for tough use, too. · with optional bandage set (item no. 1147788, p. 391) also mountable on bikes without eyelets · broadened bag support · with mount for tension straps (e.g. for Xtreme stable tension strap triple, item no. 1502505) · with rear light/reflector mount (hole distance 50/80 mm) · with spring flap · suitable for 26" and 28" bikes · weight: approx. 830 g · max. load capacity: approx. 40 kg · tube Ø pack bag mount: approx. 10,5 mm (price without decoration)